|
s:
More Links:
Complete AcornPipe Downloads
AcornPipe Update Downloads
Network File Downloads
Demonstration Videos
Learning Centre - PDF Tutorial
Files
Learning: Download Flash Video Tutorials
Frequently Asked Questions and Tips
(Troubleshooting)
Vista Problems
Installation Drawings
Frequently Asked Questions
Material Control in AcornPipe
Software
| |
Flash video files,
as well as PDF files help you learn AcornPipe Software
techniques.
We use zipped files to protect you from internet
viruses when downloading.
This is not an absolute guarantee, but it does offer some protection.
You should still use a good virus protection software.
Your computer must have a "Flash" viewer installed to view these videos.
To visit Macromedia's Website and download the free viewer, click on the icon below.
Click Here to view the video:
Adding New Material Categories and New Material to the
Master Files
Add new material categories to the
Master Files, then add new material.
Click Here to view the video:
Importing JPG images to your AcornPipe Drawing
Add images to the
C:\AcornClients\Your Job
directory, then import these images to the drawing.
Click Here to view the video:
Dimensioning Pipe and adding Pipe Joints
Draw pipe, dimension pipe at
intervals to create cut lengths.
Click Here to view the video:
Drawing Flanges With Differing Ratings and Faces on the
Same Drawing
Draw Flanges using the 'offspec'
option to alter ratings and flange faces.
Movie demonstrations below -
Download the zipped file and save it to a Temporary directory on
your C drive. Next double click on the zipped file to extract the executable
file.
Then double click the "exe file to install the Flash Video, complete with menu
items placed on
the programs menu. OR Download the executable files, and install the videos from
them.
Download "Drawing with AcornPipe" Video executable
-
click
here
Unzip this executable file and double click to run
the video.
Getting
Started with the AcornPipe Program
Download this zipped file, "Getting Started with the AcornPipe Program.zip"
and save it to a Temp directory on
the C drive.
Next double click on the zipped file to
extract the
executable file: Getting Started with the AcornPipe Program.exe.
Double clicking on the executable will
install the video to a directory
named
"AcornPipe Flash Video"
on the C drive, however you can
change the install location.
To view the video select from the
Program Menu.
OR browse to the C:\Acorn Flash Video
directory, double click on
Getting Started with the AcornPipe Program.htm to view the
video in your
browser,
complete with controls for fast forwarding, pausing, etc.
Dimensioning Pipe and Fittings, Dimensioning to an Open Pipe End,
Offset Boxes,
Between WOL/TOL/SOL Placement on a Header Pipe.
Dimensioning
Pipe and Fittings Flash Video - Download Zipped File
Download this zipped file, "Dimensioning Pipe and Fittings Flash Video.zip"
and save it to a Temp directory on
the C drive.
Next double click on the zipped file to extract the
executable file: Dimensioning Pipe and Fittings Flash Video.zip
Double clicking the executable will
install the video to a directory
named
"AcornPipe Flash Video"
on the C drive, however you can
change the install location.
To view the video select from the
Program Menu.
OR browse to the C:\Acorn Flash Video directory, double click on
Dimensioning Pipe and Fittings Flash Video.htm" to view the video in your
browser.
This will display the video
in your browser, complete with controls for fast forwarding, pausing, etc.
Create
Library Files form the Standard Details/Draw Your Own features,
then Save and Import to Other
Drawings.
Library Files - Creating, Saving, Importing - Click Here
to Download Video
Download this zipped file, "Library
Items-Creating-Saving-Importing Video Setup.zip"
and save it to a Temp directory on
the C drive.
Next double click on the zipped file to extract the executable file:
"Library Items-Creating-Saving-Importing Video.exe"
Double clicking the executable will
install the video to a directory
named
"AcornPipe Flash Video"
on the C drive, however you can
change the install location.
To view the video select from the Program Menu. OR double click on
Library Items-Creating-Saving-Importing .htm" to begin the demonstration video.
This will display the video
in your browser, complete with controls for fast forwarding, pausing, etc.
Your computer must have a "Flash" viewer installed to view this video.
To visit Macromedia's Website and download the fee viewer, click on the icon
above.
Weld Mapping and Heat Numbers
Flash Video
Download this zipped Install file - click here
Also available as a .PDF file
This demonstration will guide you through the Weld Mapping as well as the
editing of Weld Tags
to add Welder ID and Heat Numbers. Extract the Zipped
executable file, then
Double click on the file
WeldMapping and Heat Numbers Flash Video file in order to begin the installation.
The setup will place the files into a directory named "AcornPipe Flash Videos",
and will also
place the item on your Program Menu in order to make it easy for you
to access them.
In the Program menu, select the Acorn Pipe Flash Videos, then select the video
you wish to display.
Your computer must have a "Flash" viewer installed to view this video.
To visit Macromedia's Website and download the fee viewer, click on the icon
above.
Editing the Bill of
Material to Remove Items - Greying Out Flash
Video
Download this zipped Install file - click here
Also available as a .PDF file
This demonstration will guide you through the Steps involved in greying
out fittings and pipe to
show lines as existing.
Extract the Zipped executable file, then
Double click on the executable file:
Remove Items from BOM - Greying Out.exe file in order to begin the installation.
The setup will place the files into a directory named "AcornPipe Flash Videos",
and will also
place a shortcut to the video on your Program Menu in order to make it easy for you
to access them.
Additional downloaded videos will also be placed into this same directory.
In the Program menu, select the Acorn Pipe Flash Videos, then select the video
you wish to display.
Your computer must have a "Flash" viewer installed to view this video.
To visit Macromedia's Website and download the fee viewer, click on the icon
above.
Edit the Bill of
Material to Change Material, Schedules Flash
Video
Download this zipped Install file - click here
Also available as a .PDF file
This demonstration will guide you through the steps involved in editing
the BOM items
to change the Material and Schedules for drawn pipe and fittings.
Extract the Zipped executable file, then Double click on the file to
begin installation:
Editing the BOM to Change Material Flash.exe file in order to begin the installation.
The setup will place the files into a directory named "AcornPipe Flash Videos",
and will also
place a shortcut to the video on your Program Menu in order to make it easy for you
to access them.
Additional downloaded videos will also be placed into this same directory.
In the Program menu, select the Acorn Pipe Flash Videos, then select the video
you wish to display.
Your computer must have a "Flash" viewer installed to view this video.
To visit Macromedia's Website and download the fee viewer, click on the icon
above.
Numbers - All about Control Numbers, Spool
Numbers, Revision Numbers
Download this zipped Install file - click here
Also available as a .PDF file
This demonstration will guide you through the Numbers used for the
Control Number,
the Spool Numbers, The Reference Drawing Numbers, etc.
Extract the Zipped
executable file, then
Double click on the file
Numbers- Control Numbers Video.exe file in order to begin the installation.
The setup will place the files into a directory named "AcornPipe Flash Videos",
and will also
place the item on your Program Menu in order to make it easy for you
to access them.
In the Program menu, select the Acorn Pipe Flash Videos, then select the video
you wish to display.
Your computer must have a "Flash" viewer installed to view this video.
To visit Macromedia's Website and download the fee viewer, click on the icon
above.
Spec Setup - Two
Part Demonstration Flash
Video
Download this Two Part Zipped Demo Install file - click here
Also available as a .PDF file
This demonstration will guide you through the steps
to set up your own specs.
This starts with an empty spec, rather than an imported spec.
This zip file will unzip to the
Spec Setup Part one
and Two.exe.
Double click on the file Spec Setup Part one and
Two.exe. in order to begin the installation.
The setup will place two subfolders into a directory named "AcornPipe Flash Videos",
and will place these items on the "Programs" menu to make it easy for you
to access them.
In the Program menu, select the Acorn Pipe Flash Videos, then select the video
you wish to display.
To visit Macromedia's Website and download the fee viewer, click on the icon
above.
Edit
your notes at the drawing screen, to create a new title block.
Create your own title block
- Download Flash Video
Download this zipped file, "Title Block-Edit Creating -
Editing Video.zip"
and save it to a
Temp directory on
the C drive. Next double click on the zipped file to extract the executable file:
"Title Block-Edit Video Setup.exe"
Double clicking the executable will
install the video to a directory
named
"AcornPipe Flash Video"
on the C drive, however you can
change the install location.
To view the video double click on
"Title Block-Edit.htm" to begin the demonstration video
or select this video from the Program Menu.
This will display the video
in your browser, complete with controls for fast forwarding, pausing, etc.
Your computer must have a "Flash" viewer installed to view this video.
To visit Macromedia's Website and download the fee viewer, click on the icon
above.
New
Client/Job Setup -
Demonstration Flash
Video
Download the New Client/Job zipped Install file - click here
Also available as a .PDF file
This demonstration will guide you through the New Client/New Job Setup.
Extract the zipped file, then
Double click on the file Client-Job Flash Video .exe
file in order to
begin the installation.
The setup will place the files into a directory named "AcornPipe Flash Videos",
and will also
place these items on the "Programs" menu to make it easy for you
to access them.
In the Program menu, select the "Acorn Pipe Flash Videos", then select the video
you wish to display.
Your computer must have a "Flash" viewer installed to view this video.
To visit Macromedia's Website and download the fee viewer, click on the icon
above.
Copy
and Paste Branches - Demonstration Flash
Video
Download this zipped Install file - click here
This demonstration will guide you through the Copy and Paste
Double click on the file Copy and Paste Branches Flash.exe file in order to begin the installation.
The setup will place the files into a directory named "AcornPipe Flash Videos",
and will also
place the item on your Program Menu.
and will place these items on the "Programs" menu to
make it easy for you
to access them.
In the Program menu, select the Acorn Pipe Flash Videos, then select the video
you wish to display.
Your computer must have a "Flash" viewer installed to view this video.
To visit Macromedia's Website and download the fee viewer, click on the icon
above.
Notes
- All About Notes - Demonstration Flash
Video
Download this zipped Install file - click here
This demonstration will guide you through the Copy and Paste
Double click on the file Notes - All About Notes
Video.exe file in order to begin the installation.
The setup will place the files into a directory named "AcornPipe Flash Videos",
and will also
place the item on your Program Menu.and will place these items on the "Programs" menu to
make it easy for you
to access them.
In the Program menu, select the Acorn Pipe Flash Videos, then select the video
you wish to display.
Your computer must have a "Flash" viewer installed to view this video.
To visit Macromedia's Website and download the fee viewer, click on the icon
above.
Drawing Demonstration with AcornPipe Software downloadable Flash
Video
Download
a Flash Video - AcornPipe Software Demo II Click Here
Extract the
"Drawing Demonstration Flash Video.exe"
executable file from the zip archive,
then Double click the .exe file to
install the video to a
directory named "Acorn Flash Video".
The setup will place the files into a directory named "AcornPipe Flash Videos",
and will also place
these items
on the "Programs" menu to make it easy for you
to access them.
In the Program menu, select the Acorn Pipe Flash Videos, then select the video
you wish to display.
Your computer must have a "Flash" viewer installed to view this video.
To visit Macromedia's Website and download the fee viewer, click on the icon
above.
This will display the video
in your browser, complete with controls for fast forwarding, pausing, etc.
Clients
and Jobs folders in Win Explorer - downloadable Flash
Video
Download
a Flash Video - Clients & Jobs - Where are they in Windows Explorer
Extract the
"Clients and Jobs - Where are they in Windows
Explorer.exe"
executable file
from the zip archive,
then Double click the .exe file to
install the video to a
directory named
"Acorn Flash Video".
The setup will place the files into a directory named "AcornPipe Flash Videos",
and will also place these items
on the "Programs" menu to make it easy for you
to access them.
In the Program menu, select the Acorn Pipe Flash Videos, then select the video
you wish to display.
Your computer must have a "Flash" viewer installed to view this video.
To visit Macromedia's Website and download the fee viewer, click on the icon
above.
This will display the video
in your browser, complete with controls for fast forwarding, pausing, etc.
Transition Piece - Create by Editing BOM - Click here to
Download the Video
Download this zipped file, "Transition Piece - Edit the BOM to Create.zip"
and save it
to a Temporary directory on
the C drive.
Next double click on the zipped file to
extract
the
executable file: "Transition Piece - Edit the BOM to Create.exe".
Double clicking on the executable will
install the video to a directory
named
"AcornPipe Flash Video"
on the C drive, however you can
change the install location.
To view the video select it from the
Program Menu
OR browse to the
C:\Acorn Flash Video
directory, double click on "Transition Piece - Edit the BOM to Create.zip"
to view the video
in your browser, complete with controls for fast forwarding, pausing, etc.
Adding
"Pipe Breaks" to your drawing, when pipe lengths cross over each other.
Pipe
Breaks - When One Pipe Length Crosses another- Click here to Download Video
Download this zipped file, "Pipe Breaks" and save it to a Temporary directory
on the C drive.
Next double click on the zipped file to extract the executable file:
"Pipe Breaks - When One Pipe Crosses Another.exe".
Double clicking on the executable will install the video to a directory named
"AcornPipe Flash Video" on the C drive, however you can change the install
location.
To view the video select it from the Program Menu OR browse to the C:\Acorn
Flash Video
directory, double click on ""Pipe Breaks - When One Pipe Crosses Another.htm"
to view the video in your browser, complete with controls for fast
forwarding, pausing, etc.
Adding
"Mitre Joint" to your drawing, how to draw, and dimension.
Mitre Joints - Drawing and Dimensioning Mitres- Click here to Download Video
Download this zipped file, "Mitre Joints" and save it to a Temporary directory
on the C drive.
Next double click on the zipped file to extract the executable file:
"Mitre Joints - Drawing - Dimensioning.exe".
Double clicking on the executable will install the video to a directory named
"AcornPipe Flash Video" on the C drive, however you can change the install
location.
To view the video select it from the Program Menu OR browse to the C:\Acorn
Flash Video
directory, double click on "Mitre Joints - Drawing - Dimensioning.htm"
to view the video in your browser, complete with controls for fast
forwarding, pausing, etc.
Edit
the "Master File" Material Categories to add Materials
Edit Material Categories to add Materials- Click here to Download Video
Download this zipped file, "Edit Material Categories to add Material" and save it to a
Temporary directory
on the C drive.
Next double click on the zipped file to extract the executable file:
"Edit Material Categories to add New Category.exe".
Double clicking on the executable will install the video to a directory named
"AcornPipe Flash Video" on the C drive, however you can change the install
location.
To view the video select it from the Program Menu OR browse to the C:\Acorn
Flash Video
directory, double click on "Edit Material Categories to add New
Category.htm"
to view the video in your browser, complete with controls for fast
forwarding, pausing, etc.
Bent
Pipe Systems - Converting Pipe - Click here to Download Video
Download this zipped file, "Convert Pipe Configuration to Bent Pipe
System Drawing and
save it to a
Temporary directory
on the C drive.
Next double click on the zipped file to extract the executable file:
"Bent Pipe System Drawing.exe".
Double clicking on the executable will install the video to a directory named
"AcornPipe Flash Video" on the C drive. You can change the install
location.
To view the video select it from the Program Menu OR browse to the C:\Acorn
Flash Video
directory, double click on "Convert Pipe Configuration to Bent Pipe
System Drawing.htm"
to view the video in your browser, complete with controls for fast
forwarding, pausing, etc.
Wall
Thickness and Schedule Changes - Click to Download Video
Download this zipped file, "Wall Thickness and Schedule Changes.zip"
and save it to a
Temporary directory
on the C drive.
Next double click on the zipped file to extract the executable file:
"Wall Thickness and Schedule Changes.exe".
Double clicking on the executable will install the video to a directory named
"AcornPipe Flash Video" on the C drive. You can change the install
location.
To view the video select it from the Program Menu OR browse to the C:\Acorn
Flash Video
directory, double click on "Wall Thickness and Schedule Changes.htm"
to view the video in your browser, complete with controls for fast
forwarding, pausing, etc.
Convert
2 90 Degree Elbows to a 180 Degree Return - Click to Download Video
Download this zipped file, "Convert - 90 Degree Elbows to 180
degree Return"
and save it to a
Temporary directory
on the C drive.
Next double click on the zipped file to extract the executable file:
"Convert 2 - 90 Degree Elbows to 180 degree Return.exe".
Double clicking on the executable will install the video to a directory named
"AcornPipe Flash Video" on the C drive. You can change the install
location.
To view the video select it from the Program Menu OR browse to the C:\Acorn
Flash Video
directory, double click on "Convert 2 - 90 Degree Elbows to 180
degree Return.htm"
to view the video in your browser, complete with controls for fast
forwarding, pausing, etc.
Create
Flange Rotation Details from the Standard Details/Draw Your Own features,
then Save to the library, and Import to Other Drawings.
Flange
Rotation Details - creating and saving - Click Here to Download Video
Download this zipped file, "Flange Rotation Details -
creating and saving.zip"
and save it to a Temp directory on the C drive.
Next double click on the zipped file to extract the executable file:
"Flange Rotation Details - creating and saving.exe" Double clicking the
executable will
install the video to a directory named "AcornPipe Flash Video" on the C drive,
however you can
change the install location. To view the video select from the Program Menu. OR
double click on
Flange Rotation Details - creating and saving.htm" to begin the demonstration
video.
The video will be displayed in your browser, complete with controls for fast
forwarding, pausing, etc.
Your computer must have a "Flash" viewer installed to view this video.
To visit Macromedia's Website and download the fee viewer, click on the icon
above.
Edit Master Files to Add Fitting Material - Download
the Video
Download this zipped file, "Edit
Master Files to Add Fitting Material.zip"
and save it to a Temp directory on
the C drive.
Next double click on the zipped file to
extract the
executable file: "Edit Master Files to Add Fitting Material.exe"
Double clicking on the executable will
install the video to a directory
named
"AcornPipe Flash Video"
on the C drive, however you can
change the install location.
To view the video select from the
Program Menu
OR browse to the
C:\Acorn Flash Video directory, double click on:
"Edit Master Files to Add Fitting Material.htm"
to view the video in your browser,
complete with controls for fast forwarding, pausing, etc.
Edit
Master Files to Add Pipe Material - Download the Video
Download this zipped file, "Edit
Master Files to Add Pipe Material.zip"
and save it to a Temp directory on
the C drive.
Next double click on the zipped file to
extract the
executable file: "Edit Master Files to Add Pipe Material.exe"
Double clicking on the executable will
install the video to a directory
named
"AcornPipe Flash Video"
on the C drive, however you can
change the install location.
To view the video select from the
Program Menu
OR browse to the
C:\Acorn Flash Video directory, double click on:
"Edit Master Files to Add Pipe Material.htm"
to view the video in your browser,
complete with controls for fast forwarding, pausing, etc.
Backing up Your Client and Job Folders - Download
the Video
Download this zipped file, "Back
up Your Client and Job Folders.zip"
and save it to a Temp directory on
the C drive.
Next double click on the zipped file to
extract the
executable file: "Back
up Your Client and Job Folders.exe"
Double clicking on the executable will
install the video to a directory
named
"AcornPipe Flash Video"
on the C drive, however you can
change the install location.
To view the video select from the
Program Menu
OR browse to the
C:\Acorn Flash Video directory, double click on:
"Edit Master Files to Add Fitting Material.htm"
to view the video in your browser,
complete with controls for fast forwarding, pausing, etc.
Contact
John Young or Donna Mackey at Acorn Pipe Systems
regarding training at
780-963-3303 or 1-800-363-9777. By email:
support@acornpipe.com
Northern Alberta Institute of Technology - courses available
This course is designed as an
introduction to isometric spooling using the Acorn
Piping Project
software package. AcornPipe software is in use by many mechanical contractors and pipe
fabrication companies.
Course objectives are:
·
new features in the Windows version
· job set-up and specifications
· drawing
and drawing options • dimensioning
• accessories (dummy legs, shoes
and anchors)
• weld maps
· plotting
the spool
· Students
will receive the full working version of the software upon completion of the course.
|
